SBGrid recommended installation

One of the primary benefits of an SBGrid software installation is that it is a managed software stack. New titles are added, obsolete versions are removed, and updates happen automatically. New software and bug fixes are an email request away ( without requiring local administrators or system admistration expertise. While there are other installation modes available (GUI, default versions, select titles, etc), this is the recommended mode of installation for most sites.

Installation Steps:

1. Create an 'sbgrid' user on the machine that will host your software installation. This step is not strictly required, but is highly recommended.

adduser sbgrid

By default the SBGrid installation manager, sbgrid-cli, will install at /opt/sbgrid. This path typically requires sudo/root to create Linux and macOS. The sudo requirement can be skipped by using the --target flag to specify an alternate installation location. This is usually preferred as /opt may be on a filesystem with insufficient capacity. The sbgrid user must have write access to this target directory.

2. Log in as the 'sbgrid' user

su sbgrid

3. Download the sbgrid-cli application

sbgrid-cli for linux

sbgrid-cli for macOS

To download directly to a server or workstation from the command line : For Linux:

curl -LO

For Mac:

curl -LO

4. Untar the archive

tar -zxvf sbgrid-cli_linux.tar.gz

5. Activate the installation

Activating the installation will create the required installation directories and core libraries for installing the software. Alternate installation paths can be used with the '--target flag'. The entire software collection will not be installed here - just an initial the core without the titles.

./sbgrid-cli activate-site --target <path to software installation location>

where the target path is writable. With --target, activation does not require sudo. The application will prompt for a site name and key which was provided by email. After this is entered and confirmed the software will be installed. A cron task is created for update checks.

The manual creation of the "/programs" symlink to the target installation directory will be required, but only for machines running the software. /programs is not needed for updates or servers that host the programs as a network share. The '--skip-folder-checking' flag can be used to install without creation of /programs or directly into an existing /programs path.

Post-Install Steps:

  1. Once the download has completed, you'll need to add a "/programs" symlink in the root directory of each machine that wants to use the software. Typically, this directory is shared via NFS to each of your computers.

    On Linux:

    ln -s /path/to/sbgrid/install/target /programs

    On macOS, root level symlinks must be defined in the /etc/synthetic.conf file. This is a simple configuration file, More info on synthetic.conf can be found here.

  2. Any user that wishes to use SBGrid needs to configure their shell to initialize the SBGrid shell environment:

    For bash: add source /programs/sbgrid.shrc to ~/.bashrc
    For tcsh: add source /programs/sbgrid.cshrc to ~/.cshrc

  3. Configure your workstations for compatibility: NOTE: XQuartz is required for many applications on macOS

SBGrid installation manager admin mode

sbgrid-cli admin mode replaces the sbgrid-admin script installation method used previously to install and automatically update SBGrid site installations. sbgrid-cli admin offers a some advantages:

  • parallel updates for fast, more efficient transfers
  • default version only for limited disk space
  • rolling updates for immediate releases

The sbgrid-cli admin command will:

  • Install all new titles added to SBGrid
  • Update existing versions when newer versions are added to SBGrid
  • Remove obsolete verisons that are no longer supported

sbgrid-cli admin Examples :

sbgrid-cli admin commands are typically run periodically from cron.

  1. To install all default versions of all titles, add new titles when available, update all installed when available and remove obsolete versions, run :

    sbgrid-cli admin
  2. To do the same but to include all versions of all titles :

    sbgrid-cli admin --all-versions
  3. To make this automatic, add a crontab entry. This can be done from sbgrid-cli with this command:

    sbgrid-cli crontab
  4. Full auto mode - all versions, all titles mac and linux, 4 processes. This is the recommened installation configuration.

    $ sbgrid-cli crontab --all-versions --darwin --linux -j 4

More crontab examples

  1. Only update the titles that have been explicitly installed, no new additions
*/15 * * * * /programs/x86_64-linux/sbgrid_installer/latest/sbgrid-cli update --all-titles --linux --darwin --yes --quiet
  1. Run a daily cleanup to preserve space
* 1 * * * /programs/x86_64-linux/sbgrid_installer/latest/sbgrid-cli clean --yes --quiet

For more info on cron configuration, see

Migrating existing script-based "sbgrid-admin" site installations

To migrate an existing site-install that uses our sbgrid-admin script, use the sbgrid-cli migrate-admin command as your sbgrid user. This will convert the legacy sbgrid-admin installation.

sbgrid@computer $  sbgrid-cli migrate-admin
Will produce
warn: The RSYNC_ARGS in your sbgridrc will not be copied over to the new configuration file.
warn: (in most cases sbgrid-cli doesn't require any custom arguments for rsync, so this should be fine)
info: Retrieving package metadata...
info: (1/9) Checking connection...
info: Checking services...
info: Checking (HTTPS) ...
info: Checking (HTTP) ...
info: (2/9) Checking rsync credentials...
info: (3/9) Calling activate API endpoint...
info: Site activation credentials provided, skipping API activation
info: (4/9) Initializing installation directories...
info: Please note that a link from the default installation directory /opt/sbgrid to the install target is required to run the software.
A link from /programs to /opt/sbgrid is also required.
info: (5/9) Synchronizing...
info: (6/9) Synchronizing...
info: (7/9) Installing sbgrid-installer@2.5.7 (x86_64-linux)...
info: Installation complete for sbgrid-installer@2.5.7 (x86_64-linux)
info: (8/9) Saving installation sitename file...
info: (9/9) Setting up your installation...
info: Setting all packages to installed & synchronizing your installation...
info: (1/2) Installing the admin cron job...
info: Cron job successfully installed to the current user's crontab
info: (2/2) Setting up your installation...
info: Migration to sbgrid-cli complete. The legacy configuration file has been renamed to /home/sbgrid/.sbgridrc_migrated
When migrating from an sbgrid-admin "site" installation to a sbgrid-cli installation, the symlinks are likely to be already in place and the info about creating them can usually be ignored

The default crontab is added by this process. You can set that with the crontab -l command. This will check for updates every 15 minutes for the default software versions.

sbgrid@computer $ crontab -l
*/15 * * * * /programs/x86_64-linux/sbgrid_installer/latest/sbgrid-cli admin

To check for updates for all versions (recommended), run sbgrid-cli crontab --all-versions which will create a crontab with the proper --all-versions flag.

sbgrid@computer $ crontab -l
*/15 * * * * /programs/x86_64-linux/sbgrid_installer/latest/sbgrid-cli admin --all-versions

Add the relevant --darwin or --linux flags to the crontab command if your installation should include software for macOS on linux or vice-versa, i.e. for an SBGrid installation shared across Mac and Linux workstations.