501959ea7c7d694a6189a24492987279e43ff821
client_CLI_install.md
... | ... | @@ -1,6 +1,5 @@ |
1 | 1 | ## SBGrid command line installation client |
2 | 2 | |
3 | -### Contents |
|
4 | 3 | - [Installation](#installation) |
5 | 4 | - [Pre-installation requirements](#installation_pre-installation-requirements) |
6 | 5 | - [Binary releases : MacOS and Linux Installation](#installation_binary-releases) |
client_install.md
... | ... | @@ -8,7 +8,6 @@ Looking to get started with the SBGrid installation client? First, set up an acc |
8 | 8 | |
9 | 9 | A command line version is also available for mac and linux - installation instructions can be found here : [CLI installation](client_CLI_install). The command line installation client is compatible with and can be used along side the graphical client. |
10 | 10 | |
11 | -### Contents |
|
12 | 11 | - [Installation](#installation) |
13 | 12 | - [Pre-installation](#installation_pre-installation) |
14 | 13 | - [Installation and Activation](#installation_installation-and-activation) |
managing_install.md
... | ... | @@ -1,12 +1,12 @@ |
1 | -### Contents |
|
2 | - - [Site Configuration](#site-configuration) |
|
1 | +## Site Configuration |
|
2 | + - [Configuration](#configuration) |
|
3 | 3 | - [Pre-Installation](#pre-installation) |
4 | 4 | - [Approximate size per Branch](#pre-installation_approximate-size-per-branch) |
5 | 5 | - [Installation](#installation) |
6 | 6 | - [Post-Installation Steps](#post-installation-steps) |
7 | 7 | - [SGI IRIX Software Branch](#sgi-irix-software-branch) |
8 | 8 | |
9 | -## Site Configuration |
|
9 | +## Configuration |
|
10 | 10 | |
11 | 11 | The SBGrid Software Suite is designed to be installed on a single computer at your site, which will then share that installation with all the workstations on your network via NFS. |
12 | 12 | We refer to this computer as the site "master" server. |